Twitter Facebook

Jump to content



For Support/complaints mail to [email protected]

For Data center questions: Datacenter-IE.com & DC-IE.com & CCIEDatacenter-IE.com
For Routing and Switching questions: Router-IE.com & CCIERNS-IE.com
For Security questions: Security-IE.com & CCIESecurity-IE.com
For Wireless questions: Wireless-IE.com & CCIEWireless-IE.com
For Service Provider questions: ServiceProvider-IE.com & SP-IE.com & CCIEServiceProvider-IE.com
For Collaboration-IE questions : Collaboration-IE.com & CollaborationIE.com & CCIECollaboration-IE.com
For CCDE-IE questions - CCDE-IE.com
For JUNIPER-IE questions : JUNIPER-IE.com & JUNIPERIE.com


Photo

Static route on Test PC: Section 6.2 Lab 3 vs WSA


No replies to this topic

#1 waleed_matter

 
waleed_matter

    Member

  • Members
  • PipPip
  • 17 posts
  • 5 thanks
 

Posted 21 August 2014 - 10:15 AM

Hi,
SW6 is also DHCP server, when test machine will get IP address from SW6 during section 6.2, During this process, it also get default gateway i.e. 7.7.99.1, whick force all traffic to go through SW6.
In order to initiate guest traffic, we need to send traffic to 7.7.15.3, so need to make sure that this traffic will go from 7.7.99.1 but in order to WSA, we need to send traffic to same destination IP i.e. 7.7.15.3 but this time from VLAN 150.
How can we accomplish both WSA as well as ISE Guest traffic by using same destination IP?
Thanks,





Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users